Tool Holders & Adapters

ZSS 200 KEYLESS quick change drill chuck for Morse Taper 2 for Annular cutters with 19 mm Weldon.

Taper Shank Arbors For Drill Chuck Available In Morse Taper 2 And 3 ZKD 216 For Morse Taper 2 ZKD 316 For Morse Taper 3 Taper Shank Arbors ZKD Is Used In Combination With Gear Rim Drill Chuck ZBK Or Keyless Quick Action Gear Rim Drill Chuck ZSB. The ZKD Drill Drift Arbors Are Meant For Magnetic Drilling Machines With Morse Taper Either Morse Taper 2 Or Morse Taper 3. The ZKD Drill Drift Arbors For Drill Chuck Are Ideal For Drilling With Twist Drill Bits On A Magnetic Drilling Machine. Just Connect The ZKD Drill Drift Arbor To The Drill Chuck, Place The Combination Arbor And Drill Chuck Inside The Morse Taper Spindle Of The Magnetic Drilling Machine And Then Insert The Desired Twist Drill Bit Inside The Drill Chuck, Thus Its Ready To Use Twist Drills On The Magnetic Drilling Machine.

The ZBI Gear Rim Quick-Action Drill Chuck Is A Premium Drill Chuck For Using With Magnetic Drill Press Of All Types. The ZBI Keyless Drill Chuck Is Used With A Combination Of ZAP 100 Drill Chuck Adapter With Weldon Shank. The ZBI Drill Chuck Fits Into One End Of The ZAP 100 Drill Chuck Adapter And This Combination Can Then Be Attached To The Magnetic Drilling Machine With Weldon Shank Capacity. The Internal Thread Of ZBI Keyless Gear Rim Drill Chuck Is 1/2'' X 20 NF.

The ZBI Gear Rim Drill Chuck Is A Premium Drill Chuck For Using With Magnetic Drilling Machines Of All Types. The ZBI Drill Chuck Is Used With A Combination Of ZAP 100 Drill Chuck Adapter With Weldon Shank. The ZBI Drill Chuck Fits Into One End Of The ZAP 100 Drill Chuck Adapter And This Combination Can Then Be Attached To The Magnetic Drilling Machine With Weldon Shank Capacity. The Internal Thread Of ZBI Gear Rim Drill Chuck Is 1/2'' X 20 NF.

The ZAP 100 Weldon Shank Adapter Is Ideal To Use With Standard Drill Chuck Used For Twist Drill Bits. On Magnetic Drilling Machines With Direct Arbour (Without Any Morse Taper) It's Not Possible To Connect A Gear Rim Drill Chuck Directly, For This One Needs The ZAP 100 Weldon Shank Adapter Which Fits Perfectly Into The Weldon Shank Of The Machine Direct Arbor. To The Second End Of The ZAP 100 Weldon Shank Adapter Is A Thread Which Can Be Fit To A Standard Drill Chuck. Thus The Combination Of A Weldon Shank Adapter + A Gear Rim Drill Chuck Makes It Possible To Use Twist Drills On A Magnetic Drilling Machine With Direct Arbour (Without Any Morse Taper) .

With quick in holder for core drills with 19 mm weldon shaft. Incl. 1 ejector pin ZAK 107 and ZAK 125

With Nitto One Touch holer for core drills with Weldon shaft 19 mm. Incl. 1 ejector pin ZAK 107 and ZAK 125

80 mm long extention with 19 mm weldon shaft incl. 1 ejector pin ZAK 080

For fine core drills with Quick-In shaft incl. 1 ejector pin ZAK 115

Fine core drill with internal thread M18 x 6 P1.5 incl. 1 ejector pin ZAK 125

The ZAP 200 Adapter Converts The Weldon Shaft Of Annular Cutter From 19 mm (1 ¼’’)To 32 mm (3/4’’). This Weldon Shank Converter Is Ideal For Using A 19 Mm Shank Annular Cutter With A 32 Mm Shank Capacity Drill Arbor. So The ZAP 200 Weldon Shaft Converters Makes It Possible To Use Annular Cutters Below 60 Mm Diameter On A 32 Mm Shank Capacity Drill Chuck Arbor Or Industrial Arbor.

The ZVH Morse Taper Extension Socket Are Used For Two Purposes, Either To Increase The Length Of The Morse Taper Spindle Or To Convert The Morse Taper To Smaller Or Larger Size. The ZVH 220 And ZVH 330 Are Morse Taper Extension Socket Used To Increase The Length Of The Morse Taper Sleeve, While The ZVH 230 Morse Taper Socket Is Used To Enlarge The Machine Morse Taper From MT2 To MT 3 And ZAV 320 Morse Taper Socket Is Used To Reduce The Machine Morse Taper From MT3 To MT.

Reducing Bush For Morse Taper The ZRH 210 Is A Morse Taper Reducing Sleeve To Convert Or Reduce The Morse Taper 2 To Morse Taper 1. ZRH 210 Outside: MT2 Inside: MT1

Tool Holder For Annular Cutters with Weldon shanks 19 mm (3/4"). ZIA 219-KN MT 2 Industrial Arbor with automatic internal lubrication. Tool holder for BDS Annular Cutters with Weldon shanks 19 mm (3/4").

Tool Holder For Annular Cutters with Weldon shanks 19 mm (3/4"). ZIA 219-M MT 2 Industrial Arbor with manual internal lubrication. Tool holder for BDS Annular Cutters with Weldon shanks 19 mm (3/4").